M100TT GNSS Receiver
M100TT is a high-performance GNSS receiverthat USES the board card of Trimble BD982 and supports multi-satellite systems,including GPS L1/L2 /L5 and GLONASS L1/L2, and retains Galileo's signal.It alsohas Ethernet and wireless data transfer, which can be set up,upgraded,andremotely transmitted. With the standard of 50Hz speed raw data and positioning data output, dual antenna receiving can conduct dire-ctional observation, whichis applicable to high-precision dynamic measure-ment, CORS station set up, land measurement,engineering measurement ,machine control,
water conservancy monitoring, meteo-rological measurement, precision agriculture, port machinery,etc. These systems are widely used in surveying and mapping, land, power,transportation, municipal, scientific research institutions, military, aviation photography industry.

Specifications
SINGNAL TRACKING
2 x 220 Channels
-GPS: L1/L2/L5
-BeiDou: B1/B2
-GLONASS: L1/L2/L3
-Galileo: L1/E5
-SBAS: L1/L5
POSITIONINGSPECIFICATIONS
PostProcessing Static：Horizontal:2.5mm+1ppm, Vertical:5.0mm+1ppm
SBAS：Horizontal:500mm,Vertical:850mm
RealTime Kinematics (RTK)：Horizontal:8mm+1ppm,Vertical:15mm+1ppm
Initializationtime: <10s
Initializationreliability: >99%
Up to 20Hz raw measurement & position outputs
Timeto First Fix
Cold start < 45s
Hot start < 11s
Signal re-acquisition<2s
PHYSICAL AND ELECTRICAL CHARACTERISTICS
Size.：213mm x 119mm x 73mm
Weight：1.2kg
Temperature Operating：-40℃~70℃
TemperatureStorage：-45℃~75℃
Humidity：95% condensation
Waterproof and dustproof: IP67
Impact vibration: can resist a meter offree fall
Power：9~16v
Communication interface: 2 RS232 interfaces/2 external power interfaces /1 Ethernet interface
Radio frequency interface: 2 GNSS antennainterfaces /1 UHF antenna interface
REFEERENCE OUTPUTS / INPUTS
CMR/CMR+/SCMRX/RTCM 2.1、 2.2、2.3、3.0、3.1
COMMUNICATION PROTOCOL
TRANSEOT/TRIMTALK
INSTRUCTIONS
3 LED indicator lights (power light/starsearch light/data transmission light)